DSD6-DIN DMX-splitter 6-vägs Wago DIN

SRS

SRS Light Design focuses on the design and construction of lighting and rigging equipment. Apart from dimmers, splitters, lighting consoles and switch packs, SRS also develops and produces wired and wireless motor controllers and other gear of sta...

Läs mer och se SRS alla produkter

DSD6-DIN DMX-splitter 6-vägs Wago DIN

DSD6-DIN DMX Splitter / Booster 6way



  • DMX splitter/booster

  • 6x DMX512 optically isolated outputs, amplified

  • 1kV isolation

  • DMX in / DMX thru

  • Overvoltage protection of DMX line

  • LED indication for DMX line

  • ArtikelnummerA62223
  • TillverkareSRS
  • Leverans:

    Tillgänglighet: Normal lagervara

Beskrivning

Detaljer

DSD6-DIN device allows splitting of the DMX line for controlling all electrical devices (lights, solenoids, etc.) from theatrical light desk via the DMX line. Each channel of the splitter is equipped with a line driver and is optically isolated from input and other outputs for up to 1000V. DSD6-DIN receives the DMX signal and sends it out again using its 6 DMX output ports allowing a startopology for efficient cable usage. Each output port is capable of driving up to 32 devices. The unit can also function as a signal booster as each port supports another 300-meter long connection.


• Snap-in screw terminals
• 1x DMX IN/THRU
• 6x DMX optically isolated, amplified
• LED indication of DMX line
• LED indication of Power supply


DMX input/output
USITT DMX512, Input/outputs are protected by transil diodes and polyswitches.


DMX connector wiring 
1: C DMX Common
2: D- DMX Data -
3: D+ DMX Data +


Power supply
DC 12-36V, 160mA
AC 12-24V, 160mA


Dimensions 
111 x 96 x 59mm, 6 module DIN plastic box


Temperature of use
 -30...+45°C


Device use 
Use DC12-25V power supply to power the DSD6-DIN. Connect incoming DMX signals to the DMX IN/THRU terminals. Amplified and optically isolated outputs are located on the bottom side of device – marked as 1-6. Outputs are protected and short-circuit proof. DATA indication is active when incoming DMX is active.

Teknisk specifikation
  • Tillverkarens art. nr 927021
  • Tillverkare SRS
  • In Terminal
  • Ut Terminal
  • Styrsignal DMX
  • Montering DIN